Toshiba GR200 Series - (iv)-1 Change active group: An example for changing the active group is shown in the following figure.; (iv)-2 Copy group setting: The user can copy an active setting from one group to another group. As an example, in the following figure “Group3” will be copied to “Group2”, as shown in Figure 12.5-12.

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1460 -
operation of the power system. In the “Protection” sub-menu, the user can change the active
group and can copy the group settings. Jump to the “Element Setting Menu” if a relay setting
is required.
Change active group: An example for changing the active group is shown in
the following figure.
Figure 12.5-11 Operation of changing active group
Copy group setting: The user can copy an active setting from one group to
another group. As an example, in the following figure “Group3” will be copied
to “Group2”, as shown in Figure 12.5-12.
Note: In the “Copy Group (A->B)” screen, the number displayed at A is the current active
group number.
Protection
Change Setting?
ENTER=Yes CANCEL=No
[►]
[ENTER]
The changed
setting is confirmed.
Protection
10:48 1/10
Common
Active Group >
Copy Group(A->B) >
Group 1 >
Group 2 >
Group 3 >
[ENTER]
[▼] x 4
[▲] x 4
[◄]
Refer to “Note: 1)”
Protection
10:48 5/11
Common
Active Group +
3
Copy Group (A->B) >
Group 1 >
Group 2 >
[▼] x 2
[▲] x 2
†Note: When the screen moves to the “Protection” sub-
menu from the “Setting” sub-menu, the cursor will
appear alongside the current active group.
[►]
Protection
10:48 5/11
Common
Active Group +
3
Copy Group (A->B) >
Group 1 >
Group 2 >
Protection
10:48 5/11
Common
Active Group +
3
Copy Group (A->B) >
Group 1 >
Group 2 >
Protection
10:48 5/11
Common
Active Group +
1
Copy Group (A->B) >
Group 1 >
Group 2 >