- 1425 -
11.4.7 Tips for settings
During the GR-TIEMS operation, we recommend the user to choose an appropriate file-name
for the setting-file. That is, for example, when the user creates the setting file for an IED at
the first time, the user is required to make it with the name “IED#1-model_01.map”. Likewise,
the user can create the other setting file with the name “IED#2-model_01.map” for the other
IED. If the user is required to modify the “IED#1-model_01.map”, the user should replace the
name by new name “IED#1-model_02.map”. Consequently, the user can easily discriminate the
setting files in the IED model2 (i.e., IED#1-model or IED#2-model) and the revision number
(i.e., 01 or 02).
Figure 11.4-12 shows the editing screen of the GR-TIEMS; the screen has a remark field
concerning to the IEC 60870-5-103 communication. Note the available length of the remark
field is up to 12 in the one-byte character. The remark field is utilized for the control of the
setting data.
Figure 11.4-12 Common setting screen in the GR-TIEMS
Note: We recommend to make the backup file of the setting data.
To Next Page
Loading...
