Toshiba GR200 Series - 9. PIXIT for Reporting model (continued); 10. PIXIT FOR LOGGING MODEL

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1589 -
(PIXIT Ed.1&Ed.2)
9. PIXIT for Reporting model (continued)
ID
Ed
Description
Value / Clarification
Rp7
1,2
What is the buffer size for each BRCB or how
many reports can be buffered
For example, LLN0$ST$Health
can be stored 408 events.
Rp8
-
Pre-configured RCB attributes that are
dynamic, compare SCL report settings
Deprecated
Rp9
1
May the reported data set contain:
- structured data objects
- data attributes
Y
Y
Rp10
1,2
What is the scan cycle for binary events
Is this fixed, configurable
More than 1.6 milliseconds
Configurable
Rp11
1
Does the device support to pre-assign a RCB to a
specific client in the SCL
N
Rp12
2
After restart of the server is the value of ConfRev
restored from the original configuration or
retained prior to restart
Restored from original
configuration
Rp13
1,2
Does the server accepts any client to
configure/enable a BRCB with ResvTms=‐1?
What fields are used to do the identification?
N
AP‐Title N
AE‐Qualifier N
<other field> N
Rp14
2
When BRCB.ResvTms is exposed, what is
default value for BRCB.ResvTms if client does
not write (must be > 0)
Or
When BRCB.ResvTms is not exposed, what is
the internal reservation time (must be >= 0)
N/A
60 seconds
<additional items>
Is it supported to change LLN0.Mod online?
N
10. PIXIT FOR LOGGING MODEL
Not applicable