Toshiba GR200 Series - 8.4.2 Transferred information about tripped phase and mode; 8.4.3 Transferred state information

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1175 -
8.4.2 Transferred information about tripped phase and mode
Information about the tripped phases and mode can be transferred with the signals in Table
8.4-2. For more information about tripped phases and modes, see sections 8.1.1(ii) and (iii).
Table 8.4-2 Transferred information
Items
Signal names
Number of faults recorded
FLT_CNT
Time at the fault occurrence
FLT_TM
Tripped at phase A
FLT_PH_A
Tripped at phase B
FLT_PH_B
Tripped at phase C
FLT_PH_C
Tripped at phase N
FLT_PH_N
Relay element operated at phase A in CB#1
FLT_OP_A
Relay element operated at phase B in CB#1
FLT_OP_B
Relay element operated at phase C in CB#1
FLT_OP_C
Relay element operated at phase A in CB#2
FLT_OP2_A
Relay element operated at phase B in CB#2
FLT_OP2_B
Relay element operated at phase C in CB#2
FLT_OP2_C
8.4.3 Transferred state information
Information collected by setting [OP Mode ID*] can transferred with the signals in Table 8.4-3.
For more information about the statuses, see sections 8.1.3(i) and (ii).
Table 8.4-3 Transferred information by OP mode settings
Items
Signal names
State taken by setting [OP Mode ID1]
FLTOPM001
State taken by setting [OP Mode ID2]
FLTOPM002
State taken by setting [OP Mode ID3]
FLTOPM003
….
….
State taken by setting [OP Mode ID128]
FLTOPM128
Logical state taken by setting [OP Mode ID201]
FLTOPM201
Logical state taken by setting [OP Mode ID202]
FLTOPM202
….
….
Logical state taken by setting [OP Mode ID264]
FLTOPM264