- 1078 -
◆ Signal monitoring points (at the end of binary input circuit)
BI15 signal with filter and programmable logic
BI16 signal with filter and programmable logic
BI17 signal with filter and programmable logic
BI18 signal with filter and programmable logic
BI19signal with filter and programmable logic
BI20ignal with filter and programmable logic
BI21 signal with filter and programmable logic
BI22 signal with filter and programmable logic
BI23 signal with filter and programmable logic
BI24 signal with filter and programmable logic
BI25 signal with filter and programmable logic
BI26 signal with filter and programmable logic
BI27 signal with filter and programmable logic
BI28 signal with filter and programmable logic
BI29 signal with filter and programmable logic
BI30 signal with filter and programmable logic
BI31 signal with filter and programmable logic
BI32 signal with filter and programmable logic
(ii) Tables (IO_SLOT2 to SLOTn) at IO#2 to IO#n
(Function ID: 200B02 to 200B0n)
Before the filter
Table is the same as the table in previous section (i)-1.
After the filter
Table is the same as the table in previous section (i)-2.
The ends of binary input circuits
Table is the same as the table in previous section (i)-3.
To Next Page
Loading...
