Toshiba GR200 Series - Page 1008

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 985 -
◆ Signal monitoring points in TPOS01
TPOS(FunctionID:513001)
Element ID
Name
Description
8004011F8E
TPOS01_TMP_75
TPOS01 reset time selected condition signal check
0004011F77
TPOS01_TRA
TPOS01 travelling info
0004011F78
TPOS01_TRA_CTR
TPOS01 travelling info for control
3104011D49
TPOS01_TRST_S
TPOS01 operation time reset signal
8204011F41
TPOS01_UDF_DET1
TPOS01 Undefined Detected (3 phase concentration data only)
8004011F40
TPOS01_UDF_STA
TPOS01 Undefined Start
◆ Connection point in PLC logic
TPOS(Function ID: 513001)
Element ID
Name
Description
800401EE30
DEV01_P1_COMMAND
dev01 P1 command
800401EE31
DEV01_P1_INTERLOCK
dev01 P1 command with interlock bypass
800401EE32
DEV01_P2_COMMAND
dev01 P2 command
800401EE33
DEV01_P2_INTERLOCK
dev01 P2 command with interlock bypass
800401EE36
DEV01_P3_COMMAND
dev01 P3 command
800401EE37
DEV01_P3_INTERLOCK
dev01 P3 command with interlock bypass
820401ED50
TPOS01IN_TMP_21
TPOS01IN_TMP_21
800401EE53
TPOS01IN_TMP_22
TPOS01IN_TMP_22
810401EE54
TPOS01IN_TMP_23
TPOS01IN_TMP_23
800401EE61
TPOS01IN_TMP_24
TPOS01IN_TMP_24
810401EE62
TPOS01IN_TMP_25
TPOS01IN_TMP_25
800401EE55
TPOS01IN_TMP_26
TPOS01IN_TMP_26
800401EE56
TPOS01IN_TMP_27
TPOS01IN_TMP_27
810401EE57
TPOS01IN_TMP_28
TPOS01IN_TMP_28
840401EE58
TPOS01IN_TMP_29
TPOS01IN_TMP_29
820401EE5A
TPOS01IN_TMP_30
TPOS01IN_TMP_30
830401EE5B
TPOS01IN_TMP_31
TPOS01IN_TMP_31
850401EE5C
TPOS01IN_TMP_32
TPOS01IN_TMP_32
800401EE65
TPOS01IN_TMP_33
TPOS01IN_TMP_33
810401EE66
TPOS01IN_TMP_34
TPOS01IN_TMP_34
800401EDDA
TPOS01IN_TMP_35
TPOS01IN_TMP_35
810401EDDB
TPOS01IN_TMP_36
TPOS01IN_TMP_36
840401EDDC
TPOS01IN_TMP_37
TPOS01IN_TMP_37
820401EE5E
TPOS01IN_TMP_38
TPOS01IN_TMP_38
830401EE5F
TPOS01IN_TMP_39
TPOS01IN_TMP_39
800401EE69
TPOS01IN_TMP_40
TPOS01IN_TMP_40
800401ED5A
TPOS01IN_TMP_41
TPOS01IN_TMP_41
800401ED77
TPOS01IN_TMP_42
TPOS01IN_TMP_42
◆ Mapping points in TPOS01
TPOS(FunctionID:513001)
Element ID
Name
Description
7004016D08
DEV01_CONTROL_REQ
DPOS01 control command received. (Mapping Data)
Note: In the table above, the user will only find Element IDs and their names for the 1
st
device, but a 2
nd
and other devices are also provided in the TPOS function. We
have omitted the Element IDs and their names for the other devices to improve
readability. Use the rule described below when the user wishes to obtain the
Element IDs and their names for the other devices.