Toshiba GR200 Series - Page 1115

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1092 -
Table 5.6-1 Settings of LED indictors #3 to #26 (Function ID: 201B01))
Setting items
Range
Units
Contents
Default setting
value
LED#3
Color
RED / GREEN / YELLOW
-
LED#3 color selection
RED
Input signal1
(Preferred Data ID)
-
Set a Data ID at the first input on LED3
(No Assigned)
Input signal2
(Preferred Data ID)
-
Set a Data ID at the second input on LED#3.
(No Assigned)
Input signal3
(Preferred Data ID)
-
Set a Data ID at the third input on LED#3.
(No Assigned)
Input signal4
(Preferred Data ID)
-
Set a Data ID at the forth input on LED#3.
(No Assigned)
Input signal5
(Preferred Data ID)
-
Set a Data ID at the fifth input on LED#3.
(No Assigned)
Input signal6
(Preferred Data ID)
-
Set a Data ID at the sixth input on LED#3.
(No Assigned)
Input signal7
(Preferred Data ID)
-
Set a Data ID at the seventh input on LED#3.
(No Assigned)
Input signal8
(Preferred Data ID)
-
Set a Data ID at the eighth input on LED#3.
(No Assigned)
LOGIC-SW
AND / OR / XOR
-
Switch for logic-gate operation on LED#3
AND
On Delay Timer
0.00 – 300.00
s
Set a value for an on-delay-timer on LED#3
0.00
Off Delay Timer
0.00 – 300.00
s
Set a value for an off-delay-timer on LED#3
0.00
INVERSE-SW
Normal / Inverse
-
Inversion operation of LED#3 signal
Normal
TIMER-SW
Off/Delay/Dwell/Latch/Blink
-
Selection of a type in the delay timer on LED#3
Off
Logic Timer
0.00 – 300.00
s
Off delay timer value for "Delay" and "Dwell" circuit
0.00
Reset signal
(Preferred Data ID)
-
Setting Data ID for "Latch" circuit
(No Assigned)
LED#4
Color
RED / GREEN / YELLOW
-
LED#4 color selection
RED
Input signal1
(Preferred Data ID)
-
Set a Data ID at the first input on LED#4
(No Assigned)
Input signal2
(Preferred Data ID)
-
Set a Data ID at the second input on LED#4.
(No Assigned)
Input signal3
(Preferred Data ID)
-
Set a Data ID at the third input on LED#4.
(No Assigned)
Input signal4
(Preferred Data ID)
-
Set a Data ID at the forth input on LED#4.
(No Assigned)
Input signal5
(Preferred Data ID)
-
Set a Data ID at the fifth input on LED#4.
(No Assigned)
Input signal6
(Preferred Data ID)
-
Set a Data ID at the sixth input on LED#4.
(No Assigned)
Input signal7
(Preferred Data ID)
-
Set a Data ID at the seventh input on LED#4.
(No Assigned)
Input signal8
(Preferred Data ID)
-
Set a Data ID at the eighth input on LED#4.
(No Assigned)
LOGIC-SW
AND / OR / XOR
-
Switch for logic-gate operation on LED#4
AND
On Delay Timer
0.00 – 300.00
s
Set a value for an on-delay-timer on LED#4
0.00
Off Delay Timer
0.00 – 300.00
s
Set a value for an off-delay-timer on LED#4
0.00
INVERSE-SW
Normal / Inverse
-
Inversion operation of LED#4 signal
Normal
TIMER-SW
Off/Delay/Dwell/Latch/Blink
-
Selection of a type in the delay timer on LED#4
Off
Logic Timer
0.00 – 300.00
s
Off delay timer value for "Delay" and "Dwell" circuit
0.00
Reset signal
(Preferred Data ID)
-
Setting Data ID for "Latch" circuit
(No Assigned)
……….
LED#26
Color
RED / GREEN / YELLOW
-
LED#26 color selection
RED
Input signal1
(Preferred Data ID)
-
Set a Data ID at the first input on LED#26
(No Assigned)
Input signal2
(Preferred Data ID)
-
Set a Data ID at the second input on LED#26.
(No Assigned)
Input signal3
(Preferred Data ID)
-
Set a Data ID at the third input on LED#26.
(No Assigned)
Input signal4
(Preferred Data ID)
-
Set a Data ID at the forth input on LED#26.
(No Assigned)
Input signal5
(Preferred Data ID)
-
Set a Data ID at the fifth input on LED#26.
(No Assigned)
Input signal6
(Preferred Data ID)
-
Set a Data ID at the sixth input on LED#26.
(No Assigned)
Input signal7
(Preferred Data ID)
-
Set a Data ID at the seventh input on LED#26.
(No Assigned)
Input signal8
(Preferred Data ID)
-
Set a Data ID at the eighth input on LED#26.
(No Assigned)
LOGIC-SW
AND / OR / XOR
-
Switch for logic-gate operation on LED#26
AND
On Delay Timer
0.00 – 300.00
s
Set a value for an on-delay-timer on LED#26
0.00
Off Delay Timer
0.00 – 300.00
s
Set a value for an off-delay-timer on LED#26
0.00
INVERSE-SW
Normal / Inverse
-
Inversion operation of LED#26 signal
Normal
TIMER-SW
Off/Delay/Dwell/Latch/Blink
-
Selection of a type in the delay timer on LED#26
Off
Logic Timer
0.00 – 300.00
s
Off delay timer value for "Delay" and "Dwell" circuit
0.00
Reset signal
(Preferred Data ID)
-
Setting Data ID for "Latch" circuit
(No Assigned)