Toshiba GR200 Series - Page 1575

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1552 -
(MICS Ed.1)
RBRF class
Attribute Name
Attr. Type
Explanation
T
M/O
GRL200
LNName
Shall be inherited from Logical-Node Class (see IEC 61850-7-2)
Data
Common Logical Node Information
LN shall inherit all Mandatory Data from Common Logical Node Class
M
OpCntRs
INC
Resettable operation counter
O
N
Status Information
Str
ACD_ABC
Start, timer running
O
Y
OpEx
ACT
Breaker failure trip (“external trip”)
T
C
N
OpIn
ACT_ABC
Operate, retrip (“internal trip”)
T
C
Y
Setting
FailMod
ING
Breaker Failure Detection Mode (current, breaker status, both,
other)
O
Y
FailTmms
ING
Breaker Failure Time Delay for bus bar trip
O
Y
SPlTrTmms
ING
Single Pole Retrip Time Delay
O
N
TPTrTmms
ING
Three Pole Retrip Time Delay
O
N
DetValA
ASG
Current Detector Value
O
Y
ReTrMod
ING
Retrip Mode
O
N
Condition C: At least one of either data shall be used depending on the applied tripping schema.
RFLO class
Attribute Name
Attr. Type
Explanation
T
M/O
GRL200
LNName
Shall be inherited from Logical-Node Class (see IEC 61850-7-2)
Data
Common Logical Node Information
LN shall inherit all Mandatory Data from Common Logical Node Class
M
OpCntRs
INC
Resettable operation counter
O
N
Measured values
FltZ
CMV
Fault Impedance
M
Y
FltDiskm
MV
Fault Distance in km
M
Y
Status Information
FltLoop
INS
Fault Loop
O
Y
Setting
LinLenKm
ASG
Line length in km
O
Y
R1
ASG
Positive-sequence line resistance
O
Y
X1
ASG
Positive-sequence line reactance
O
Y
R0
ASG
Zero-sequence line resistance
O
Y
X0
ASG
Zero-sequence line reactance
O
Y
Z1Mod
ASG
Positive-sequence line impedance value
O
N
Z1Ang
ASG
Positive-sequence line impedance angle
O
N
Z0Mod
ASG
Zero-sequence line impedance value
O
N
Z0Ang
ASG
Zero-sequence line impedance angle
O
N
Rm0
ASG
Mutual resistance
O
Y
Xm0
ASG
Mutual reactance
O
Y
Zm0Mod
ASG
Mutual impedance value
O
N
Zm0Ang
ASG
Mutual impedance angle
O
N