Toshiba GR200 Series - Page 1692

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1669 -
Technical data for Line differential relay
Analog Inputs
Rated current In
1A or 5A (selectable)
Rated voltage Vn
100V to 120V
Rated Frequency
Either 50Hz or 60Hz (specified when the ordering)
Overload Rating
Current inputs
4 times rated current continuous
5 times rated current for 3 minutes
6 times rated current for 2 minutes
30 times rated current for 10 seconds
100 times rated current for 1 second
250 times rated current for one power cycle (20 or 16.6ms)
Voltage inputs
2 times rated voltage continuous
2.5 times rated voltage for 1 second
Burden
Phase current inputs
 0.1VA at In = 1A,  0.2VA at In = 5A
Earth current inputs
 0.3VA at In = 1A,  0.4VA at In = 5A
Sensitive earth fault inputs
 0.3VA at In = 1A,  0.4VA at In = 5A
Voltage inputs
 0.1VA at Vn
Power Supply
Rated auxiliary voltage
24/48/60Vdc (Operative range: 19.2 – 72.0Vdc)
110/250Vdc (Operative range: 88.0 – 300.0Vdc)
Superimposed AC ripple on DC supply
 15%
Power Supply Interruption Withstand Period
(IEC60255-11)
110/250Vdc rating : 50ms
Power consumption
 15W (quiescent)
 25W (maximum)