Change place and contents
Added the notice not to guarantee the operation on the
AC power source
Added the 1000BASE-LX module
Revised and added new information over all for
monitoring and metering functions
Added the description to monitor the LAN
communication
Revised the performance value about GOOSE sending
to other Logical Node device in Table 11.2-3
Deleted “PBSB_OST Class” in MICS lists of IEC61850
PIXIT8: PIXIT FOR REPORTING MODEL:
11: PIXIT FOR CONTROL MODEL:
Modified from 'N' to 'Y', '40' to '408', respectively in in
"data update" and "The number of events". Changed
descriptions from "station-level" to "station-control"
based on the standard in. Changed from Y to N at
"maintenance" and "process".
TICS:
Added Dpos in part 6 of2. Mandatory Intop Tissues.
Tables of BIO codes modified
Added 37 model for ordering
Renewed the contents of ARC function
Deleted the DPOS (old Chap 4.2) and TPOS (old Chap
4.4) functions
Tables of BIO codes modified
Typo revised in Function table
Resorted the DPOS (Chap 4.8) and TPOS (Chap 4.9)
functions
Added the ILK (4.7), the DPOS (4.8), the GENBI
(4.10), and the ASEQ (4.11) functions
Added for the equations in ZS and ZG functions
Revised the STUB-OC logic about the signals coming
from the ICD function
Revised the SOTF-OC logic about the signals coming
from the ICD function
Revised the OC logic about the signals coming from the
ICD function
Added the note for the OC signal characterized with the
DT and IDMT operations
Revised the EF logic about the signals coming from the
ICD function
Added the note for the EF signal characterized with the
DT and IDMT operations
Revised the OCN logic about the signals coming from
the ICD function
Added the note for the OCN signal characterized with
the DT and IDMT operations
Revised the BCD logic about the signals coming from
the ICD function
To Next Page
Loading...
