Toshiba GR200 Series - Page 19

6F2S1914 (0.49)
xix
8.3.6 Screen information ........................................................................................................... 1168
8.3.7 Interpolation of transferred data ..................................................................................... 1169
8.3.8 Setting ............................................................................................................................... 1170
8.3.9 Signal (Data ID) ............................................................................................................... 1171
Transferred information during fault ..................................................................................... 1172
8.4.1 Transferred metering values ............................................................................................ 1173
8.4.2 Transferred information about tripped phase and mode ................................................ 1175
8.4.3 Transferred state information .......................................................................................... 1175
8.4.4 Transferring record value and information ..................................................................... 1176
9 Monitoring function ........................................................................................................................ 1187
Outline ..................................................................................................................................... 1188
Metering data (Metering group) ............................................................................................. 1188
9.2.1 Metering information on the screen ................................................................................ 1189
9.2.2 Setting for measurements ................................................................................................ 1190
9.2.3 Diminishing a very small value to display zero .............................................................. 1191
9.2.4 Flow settings for active/reactive/apparent powers.......................................................... 1191
9.2.5 Polarity setting for power factor values .......................................................................... 1192
9.2.6 Setting for the report (Dead band feature) ...................................................................... 1194
Statistics data (Power value group) ........................................................................................ 1196
9.3.1 Power information on the screen ..................................................................................... 1196
9.3.2 Setting for power values ................................................................................................... 1196
9.3.3 Regulation of power values .............................................................................................. 1196
Statistics data (Demand value group) .................................................................................... 1197
9.4.1 Demand information on the screen ................................................................................. 1197
9.4.2 Max/Min/Averaged information about the demand feature ........................................... 1197
9.4.3 Demand cycle .................................................................................................................... 1198
9.4.4 Resetting data in demand features .................................................................................. 1198
Statistics data (Peak-demand value group) ........................................................................... 1199
9.5.1 Max/Min/Averaged information about the peak-demand feature .................................. 1199
9.5.2 Resetting data of peak-demand features ......................................................................... 1199
Statistics data (Counter group) .............................................................................................. 1200
9.6.1 Count information on the screen .................................................................................... 1200
9.6.2 Report setting for GCNT (Dead band feature) ............................................................... 1200
Statistics data (Accumulated time)........................................................................................ 1201
Statistics data (Total time group) .......................................................................................... 1202
9.8.1 Time information on the screen ...................................................................................... 1202
9.8.2 Report setting for TOTALTIM (Dead band feature) ...................................................... 1202
Monitoring for miscellaneous functions ................................................................................. 1203
Setting ..................................................................................................................................... 1204