- 472 -
◆ Signal monitoring point
For single-phase ARC1 start
For single-phase ARC1 condition (sub)
For single-phase ARC1 start (sub)
For single-phase ARC2 condition
For single-phase ARC2 start
For single-phase ARC2 condition (sub)
For single-phase ARC2 start (sub)
For three-phase ARC1 condition
For three-phase ARC1 start
For three-phase ARC1 condition (sub)
For three-phase ARC1 start (sub)
For three-phase ARC2 condition
For three-phase ARC2 start
For three-phase ARC2 condition (sub)
For three-phase ARC2 start (sub)
◆ Connection point in PLC logic
Final trip mode for autoreclose 1
Multi-phase mode for autoreclose 1
Off mode for autoreclose 1
Original mode for autoreclose 1
Single and three-phase mode for autoreclose 1
Single-phase mode for autoreclose 1
Three-phase mode for autoreclose 1
Final trip mode for autoreclose 2
Multi-phase mode for autoreclose 2
Off mode for autoreclose 2
Original mode for autoreclose 2
Single and three-phase mode for autoreclose 2
Single-phase mode for autoreclose 2