- 474 -
◆ Connection point in PLC logic
For single-phase ARC1 condition
For single-phase ARC1 start
For single-phase ARC1 condition (sub)
For single-phase ARC1 start (sub)
For single-phase ARC2 condition
For single-phase ARC2 start
For single-phase ARC2 condition (sub)
For single-phase ARC2 start (sub)
For three-phase ARC1 condition
For three-phase ARC1 start
For three-phase ARC1 condition (sub)
For three-phase ARC1 start (sub)
For three-phase ARC2 condition
For three-phase ARC2 start
For three-phase ARC2 condition (sub)
For three-phase ARC2 start (sub)
(2.69a)