Toshiba GR200 Series - Page 876

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 853 -
DPOS01 function (Function ID: 512001)
“DPOS01_FSL_BO_CSF”
(512001_8A03011DC4)
DEV01_OP_INTERLOCK
Operate command
without ILK† condition
ILK† condition (“OFF”) passed
PLC in DIR operate
For DIR operation
512001 800301EE31
Signals from user PLC logic
Output
Select logic in DPOS01
0.1s
0
t
0.6s
0
t
&
&
&
Select condition‡
1≥
OFF-control command requiring ILK† checking
(PLC#1 connection point)
DEV01_OP_COMMAND
512001 800301EE30
OFF-control command requiring no ILK† checking
(PLC#2 connection point)
Operate command with
ILK† condition
DPOS01-Open
Select “Failed”
To BO connection
Select “success”
To “Wait for a command”
For DIR operation
Figure 4.8-12 Select ‘Off’ by the PLC function in DPOS01
††
†Note: The ILK function provides the operation criteria for “Off”.
‡Note: A “select condition” signal is provided from the select condition scheme. For more
information, see Figure 4.8-13.
††
Note: To identify the input and output points of the other DPOS logics, see Table 4.8-3
for the inputs (PLC#1 and PLC#2) and Table 4.8-9 for the outputs.