Managed Switch CLI Manual, Release 8.0.3
Captive Portal Commands 12-11
v1.0, July 2010
max-output-octets
Use this command to configure the maximum number of octets the user is allowed to receive.
After this limit has been reached the user will be disconnected. The number of octets is in bytes. 0
indicates limit not enforced Use the “no”.
no max-output-octets
Use this command to reset the limit to the default.
max-total-octets
Use this command to configure the maximum number of octets the user is allowed to transfer, i.e.,
the sum of octets transmitted and received. After this limit has been reached
the user will be
disconnected. The number of t
otal octets is in bytes. 0 indicates limit not enforced. Use the
“no” form of this command to reset the limit to the
default.
no max-total-octets
Use this command to reset the limit to the default.
Default 0
Format max-output-octets <0-4294967295>
Mode Captive Portal Instance mode
Format no max-output-octets
Mode Captive Portal Instance mode
Default 0
Format max-total-octets <0-4294967295>
Mode Captive Portal Instance mode
Default 0
To Next Page
Loading...
