- 1358 -
Figure 11.3-12 DataSet list
As shown in the above figure, “Prot/EF_PTOC1$Str1, general” is already
mapped in the Dataset “STAT1”.
3. To check, if the DataSet is already assigned to RCB, Right click on “LLN0” and
select Edit Report Control, then Report Control List screen appears as shown in
Figure 11.3-13.
Figure 11.3-13 Report Control List
As shown in the above figure, the DataSet “STAT1” is already assigned to
RCB “brcbST-A”.
To Next Page
Loading...
