- 1366 -
For example, to let a device execute “Select”, “Operate” and “Cancel” commands
from the sever through “CSWI4” and transmit the information to an IED, the user
should map an input point (Data ID) to several variables of “CSWI4” (See Figure
11.3-22). Mapping period for Control shall be 100.
*Note: For more information of the input points, see chapter
General control function or
Control and monitoring application
, if available.
Input DataID
DE V01_ CONTROL_ RE Q
Figure 11.3-22 Control function mapping
To complete the setting for control function, after mapping data, the user needs
to set BI, BO† in the GR-TIEMS ->Setting.
†Note: For more information for the BI, BO, see Chapter
Technical description: Binary IO
module
.
To Next Page
Loading...
