Toshiba GR200 Series - Page 1678

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1655 -
Positions
[Software selection]
7
S
G
T
E
F
U
9
V
Configurations
G
R
L
2
0
0
-
0
3
-
-
Application of power system
Assignment at ‘7’ (see p.1649)
Function block
See Function table (see p.1656)
1ch communication of the remote end / Time Synch.
Assignment at ‘E’ position (see p.1653)
Assignment at ‘F’ position (see p.1653)
2ch communication of remote ends / Time Synch.
Assignment at ‘E’ position (see p.1654)
Assignment at ‘F’ position (see p.1654)
Protocol†1
IEC60870-5-103 or IEC 61850
1
IEC 61850
2
Outline
Assignment at ‘9’ position (see p. 1650 or 1651)
Language
English
E
1
† One of the codes (i.e., 1 or 2 at positons U) has to be selected to be relevant for the user’s purpose:
Table Protocol relevant table
Software model at Position “G&T”
Ordering code at Position “U”
1
2
IEC 61850†2
33
✓
37
IEC 60870-5-103†3
33
✓
NA
37
✓: Valid NA: Not applicable
2
† Duplicated LAN modules are required for the hot-standby. For the PRP/HSR/RSTP, choose LAN
modules including “L” or “N” code at position E (see p. 1653 or 1654).
3
† For IEC60870-103, a serial module (RS485 or fiber) is required (see p. 1653 or 1654).