EasyManua.ls Logo

Toshiba GR200 Series - Page 1679

Toshiba GR200 Series
1770 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 1656 -
Function table (1/2)
Function
Block
Protection function
Ordering
No. §
1
33
37
DIFL
87
Phase-segregated current differential protection
50 FS
Fail safe OC
27 FS
Fail safe UV
CCC
Charging current compensation
CTF
CT failure detection by Id
87R
Remote differential trip
THC
Through-fault current countermeasure
50STUB
Stub protection
DIFG
87N
Zero phase current differential protection
50N/51N FS
Fail safe EF
CCC
Charging current compensation
87R
Remote differential trip
THC
Through-fault current countermeasure
50STUB
Stub protection
DTT
DTT
Direct transfer trip function
ZS (6zones)
21
Distance protection(for phase fault) with 6zones
68
Power swing block
50SOTF
Switch on to fault protection
ZG (6zones)
21N
Distance protection(for earth fault) with 6zones
68
Power swing block
50SOTF
Switch on to fault protection
DISCAR
85-67N
Directional earth fault carrier command protection
DEFCAR
85-21
Distance carrier command protection
SOTF-OC
50SOTF
Switch on to fault protection
OC
50/67
Non-directional / directional definite time over-current protection
51/67
Non-directional / directional inverse time over-current protection
EF
50N/67N
Non-directional / directional definite time earth fault over-current protection
51N/67N
Non-directional / directional inverse time earth fault over-current protection
OCN
46/67
Non-Directional / directional Negative sequence phase over-current protection
THM
49
Thermal overload protection
BCD
46BC
Broken conductor protection
CBF
50BF
Circuit breaker failure protection
OV
59
Phase over-voltage protection
OVS
59
Phase-phase over-voltage protection
OVG
59N
Earth fault over-voltage protection
UV
27
Phase under-voltage protection
UVS
27
Phase-phase under-voltage protection
Basic
Basic with control
§
1
Note: Ordering number is keyed at ‘G’ and ‘T’ positions on ‘Software selection’ (see p. 1655).

Table of Contents

Related product manuals