Lenze E84AVHC Series - 14.1.124 L_RSFlipFlop_2

8400 HighLine | Parameter setting & configuration
Function library
Function blocks | L_RSFlipFlop_2
1046 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
14.1.124 L_RSFlipFlop_2
The functionality of this FB corresponds to that of an RS flipflop:
 An input signal at bSet serves to set the bOut output permanently.
 An input signal at bReset serves to reset the output.
 Additional, inverted output bNegOut
Inputs
Outputs
Identifier
Data type
Information/possible settings
bSet
BOOL
Setting input
TRUE • The bOut output is set to TRUE.
•The bNegOut output is set to FALSE.
bReset
BOOL
Reset input
TRUE • The bOut output is set to FALSE.
•The bNegOut output is set to TRUE.
Identifier
Data type
Value/meaning
bOut
BOOL
Output signal
bNegOut
BOOL
Output signal, inverted
/B56)OLS)ORSB
E5HVHW
E6HW
5
6
E2XW
E1HJ2XW
4
4
efesotomasyon.com - Lenze