Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 465
8400 HighLine | Parameter setting & configuration
Diagnostics & error management
Monitoring
9.6.1 Monitoring configuration
How to configure the monitoring functions using the »Engineer«:
1. Go to the Project view and select the 8400 controller whose monitoring functions
are to be configured.
2. Select the Diagnostics tab from the Workspace.
3. Click the Monitoring... button.
•The 8400 monitoring configuration dialog box is displayed via which the desired
settings can be made:
See also: Setting the error response ( 466)
efesotomasyon.com - Lenze
To Next Page
Loading...