Lenze E84AVHC Series - C00760 | LA_SwitchPos: Analog connection list; C00761 | LA_SwitchPos: Digital connection list

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 703
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00760
C00760
C00761
Parameter | Name:
C00760 | LA_SwitchPos: Analog connection list
Data type: UNSIGNED_16
Index: 23815
d
= 5D07
h
Connection parameters for "Switch-off positioning" application: 16-bi inputs
• Selection of the 16-bit output signals for connection with the 16-bit input signals
• The selection list contains all 16-bit output signals which can be assigned to the 16-bit inputs mapped by the
subcodes.
Selection list
See selection list - analog signals
Subcodes Lenze setting Info
C00760/1 0: Not connected LA_SwitchPos
: wCANDriveControl
C00760/2 0: Not connected LA_SwitchPos
: wMCIDriveControl
C00760/3 0: Not connected LA_SwitchPos
: nVoltageAdd_a
C00760/4 0: Not connected LA_SwitchPos
: nBoost_a
C00760/5 0: Not connected LA_SwitchPos
: nPWMAngleOffset
C00760/6 0: Not connected LA_SwitchPos
: nTorqueMotLim_a
C00760/7 0: Not connected LA_SwitchPos
: nTorqueGenLim_a
C00760/8 0: Not connected LA_SwitchPos
: nMainSetValue_a
C00760/9 0: Not connected LA_SwitchPos
: nAuxSetValue_a
C00760/10 0: Not connected LA_SwitchPos
: nGPAnalogSwitchIn1_a
C00760/11 0: Not connected LA_SwitchPos
: nGPAnalogSwitchIn2_a
C00760/12 0: Not connected LA_SwitchPos
: nGPArithmetikIn1_a
C00760/13 0: Not connected LA_SwitchPos
: nGPArithmetikIn2_a
C00760/14 0: Not connected LA_SwitchPos
: nGPMulDivIn_a
C00760/15 0: Not connected LA_SwitchPos
: nGPCompareIn1_a
C00760/16 0: Not connected LA_SwitchPos
: nGPCompareIn2_a
C00760/17 0: Not connected LA_SwitchPos
: wSMCtrl
C00760/18 0: Not connected LA_SwitchPos
: wReserved2
C00760/19 0: Not connected LA_SwitchPos
: wReserved3
C00760/20 0: Not connected LA_SwitchPos: wReserved4
C00760/21 0: Not connected LA_SwitchPos
: wReserved5
C00760/22 0: Not connected LA_SwitchPos
: wFreeIn1
C00760/23 0: Not connected LA_SwitchPos: wFreeIn2
C00760/24 0: Not connected LA_SwitchPos
: wFreeIn3
C00760/25 0: Not connected LA_SwitchPos
: wFreeIn4
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00761 | LA_SwitchPos: Digital connection list
Data type: UNSIGNED_16
Index: 23814
d
= 5D06
h
Connection parameters for "Switch-off positioning" application: Binary inputs
• Selection of the binary output signals for connection with the binary input signals
• The selection list contains all binary output signals which can be assigned to the binary inputs mapped by the
subcodes.
Selection list
See selection list - digital signals
Subcodes Lenze setting Info
C00761/1 0: Not connected LA_SwitchPos
: bCInh
C00761/2 0: Not connected LA_SwitchPos
: bFailReset
C00761/3 0: Not connected LA_SwitchPos
: bSetQuickstop
efesotomasyon.com - Lenze