Lenze E84AVHC Series - 9.9.1.4 Example for bit coding of the error number

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 473
8400 HighLine | Parameter setting & configuration
Diagnostics & error management
Error messages of the operating system
9.9.1.4 Example for bit coding of the error number
C00168
displays an internal error number: "142278671".
 This decimal value corresponds to the following bit sequence:
 Thus, error number "142278671" means:
A DC bus undervoltage has been detected in the "Motor management / encoder"
subject area. The error response is a "Fault" which must be unlocked separately after
the error has been eliminated.
Assignment Information Meaning in the example
Reserved -
Error type 2: Trouble
Error subject area 123: Motor management / encoder
Error ID 15: "LU: DC bus undervoltage
"
210 3
Bit
162526
31
015
29
30
00001000011110 1 10000 000000111100
00
0010
00011110 1 1
0000 000000111100
efesotomasyon.com - Lenze