Lenze E84AVHC Series - C00727 | Keypad digital values; C00728 | Keypad analog values

8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00726
702 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
C00726
C00727
C00728
C00750
Parameter | Name:
C00726 | Current limit values
Data type: UNSIGNED_8
Index: 23849
d
= 5D29
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00727 | Keypad digital values
Data type: UNSIGNED_8
Index: 23848
d
= 5D28
h
Executing control commands when operating via keypad
Setting range (min. value | unit | max. value)
01
Subcodes Lenze setting Info
C00727/1 0 "1" ≡ request quick stop
C00727/2 0 "1" ≡ request DC-injection braking
C00727/3 0 "1" ≡ request reversal
C00727/4 0 "1" ≡ request fixed speed setpoint 1
C00727/5 0 "1" ≡ request fixed speed setpoint 2
C00727/6 0 "1" ≡ motor potentiometer: request activation
C00727/7 0 "1" ≡ motor potentiometer: request pos. acceleration
C00727/8 0 "1" ≡ motor potentiometer: request neg. acceleration
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00728 | Keypad analog values
Data type: INTEGER_16
Index: 23847
d
= 5D27
h
Selection of different setpoints when operating via keypad
Setting range (min. value | unit | max. value)
-199.99 % 199.99
Subcodes Lenze setting Info
C00728/1 100.00 % Torque limit in motor mode
C00728/2 100.00 % Torque limit in generator mode
C00728/3 0.00 % Setpoint speed
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00750 | Select. of BU oscillos. channels
Data type: UNSIGNED_8
Index: 23825
d
= 5D11
h
This code is for device-internal use only and must not be written to by the user!
efesotomasyon.com - Lenze