Lenze E84AVHC Series - C00701 | LA_NCtrl: digital connection list

8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00701
694 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
C00701
C00700/24 0: Not connected LA_NCtrl
: wReserved4
C00700/25 0: Not connected LA_NCtrl
: wReserved5
C00700/26 0: Not connected LA_NCtrl
: wFreeIn1
C00700/27 0: Not connected LA_NCtrl
: wFreeIn1
C00700/28 0: Not connected LA_NCtrl
: wFreeIn1
C00700/29 0: Not connected LA_NCtrl
: wFreeIn1
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00700 | LA_NCtrl: analog connection list
Data type: UNSIGNED_16
Index: 23875
d
= 5D43
h
Parameter | Name:
C00701 | LA_NCtrl: digital connection list
Data type: UNSIGNED_16
Index: 23874
d
= 5D42
h
Connection parameters for "Actuating drive speed" application: Binary inputs
• Selection of the binary output signals for connection with the binary input signals
• The selection list contains all binary output signals which can be assigned to the binary inputs mapped by the
subcodes.
Selection list
See selection list - digital signals
Subcodes Lenze setting Info
C00701/1 0: Not connected LA_NCtrl
: bCInh
(control input for setting controller inhibit)
C00701/2 16008: DigIn_CInh LA_NCtrl
: bFailReset
(control input for error acknowledgement)
C00701/3 0: Not connected LA_NCtrl
: bSetQuickstop
(control input for quick stop request)
C00701/4 16002: DigIn_bIn3 LA_NCtrl
: bSetDCBrake
(control input for DC-injection braking request)
C00701/5 0: Not connected LA_NCtrl
: bRFG_Stop
(control input for stopping the speed ramp function
generator)
C00701/6 0: Not connected LA_NCtrl
: bRFG_0
(control input for setting the speed ramp function
generator to 0)
C00701/7 0: Not connected Reserved
C00701/8 16003: DigIn_bIn4 LA_NCtrl
: bSetSpeedCcw
(control input for change of direction of rotation)
C00701/9 16000: DigIn_bIn1 LA_NCtrl
: bJogSpeed1
(selection input for fixed setpoints)
C00701/10 16001: DigIn_bIn2 LA_NCtrl
: bJogSpeed2
(selection input for fixed setpoints)
C00701/11 0: Not connected LA_NCtrl
: bJogSpeed4
(selection input for fixed setpoints)
C00701/12 0: Not connected LA_NCtrl
: bJogSpeed8
(selection input for fixed setpoints)
C00701/13 0: Not connected LA_NCtrl
: bJogRamp1
(selection input for additional acceleration/deceleration
times)
C00701/14 0: Not connected LA_NCtrl
: bJogRamp2
(selection input for additional acceleration/deceleration
times)
C00701/15 0: Not connected LA_NCtrl
: bJogRamp4
(selection input for additional acceleration/deceleration
times)
efesotomasyon.com - Lenze