Lenze E84AVHC Series - 14.2.23 LS_PulseGenerator

8400 HighLine | Parameter setting & configuration
Function library
System blocks | LS_PulseGenerator
1088 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
14.2.23 LS_PulseGenerator
This system block outputs 9 different fixed frequencies and 1 frequency with
parameterisable pulse/dead time.
Outputs
Parameter
Identifier
Data type
Value/meaning
b100Hz
BOOL
Rectangular signal 100 Hz
b10Hz
BOOL
Rectangular signal 10 Hz
b2Hz
BOOL
Rectangular signal 2 Hz
b1Hz
BOOL
Rectangular signal 1 Hz
b1HzFlash
BOOL
80 ms-pulse, repetition rate every second
b2HzFlash
BOOL
80 ms-pulse, repetition rate every 0.5 seconds
bSingleFlash1
BOOL
80 ms pulse, repetition rate every 1.25 seconds
bSingleFlash2
BOOL
80 ms pulse, repetition rate every 2 seconds
bDoubleFlash
BOOL
80 ms-double pulse, repetition rate every 1.25 seconds
bSquareWave
BOOL
Output frequency with pulse/dead time set in C00400/1...2
Parameter Possible settings Info
C00400/1 0 ms 60000 Length of LOW level (dead time)
• For output bSquareWave
• Lenze setting: 1000 ms
C00400/2
0 ms 60000 Length of HIGH level
• For output bSquareWave
• Lenze setting: 1000 ms
E+]
E+]
E+]
E6LQJOH)ODVK
/6B3XOVH*HQHUDWRU
E+]
E+])ODVK
E+])ODVK
& &
+]
E6LQJOH)ODVK
E'RXEOH)ODVK
E6TXDUH:DYH
efesotomasyon.com - Lenze