Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 787
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C01670
C01670
C01671
C01672
Parameter | Name:
C01670 | L_ComparePhi 1-5: Function
Data type: UNSIGNED_8
Index: 22905
d
= 5979
h
Selection of comparison operation
• If the statement of the selected comparison operation is true, the binary output bOut is set to TRUE.
Selection list
1In1 = In2
2In1 > In2
3In1 < In2
4 |In1| = |In2|
5 |In1| > |In2|
6 |In1| < |In2|
Subcodes Lenze setting Info
C01670/1 1: In1 = In2 L_ComparePhi_1
: Function
C01670/2 1: In1 = In2 L_ComparePhi_2
: Function
C01670/3 1: In1 = In2 L_ComparePhi_3
: Function
C01670/4 1: In1 = In2 L_ComparePhi_4
: Function
C01670/5 1: In1 = In2 L_ComparePhi_5
: Function
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C01671 | L_ComparePhi 1-5: Hysteresis
Data type: INTEGER_32
Index: 22904
d
= 5978
h
Hysteresis for the comparison function
Setting range (min. value | unit | max. value)
0 incr 1073741824
Subcodes Lenze setting Info
C01671/1 0 incr L_ComparePhi_1
: Hysteresis
C01671/2 0 incr L_ComparePhi_2
: Hysteresis
C01671/3 0 incr L_ComparePhi_3
: Hysteresis
C01671/4 0 incr L_ComparePhi_4: Hysteresis
C01671/5 0 incr L_ComparePhi_5
: Hysteresis
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C01672 | L_ComparePhi 1-5: Window
Data type: INTEGER_32
Index: 22903
d
= 5977
h
Window for the comparison operation
Setting range (min. value | unit | max. value)
0 incr 1073741824
Subcodes Lenze setting Info
C01672/1 0 incr L_ComparePhi_1
: Window
C01672/2 0 incr L_ComparePhi_2
: Window
C01672/3 0 incr L_ComparePhi_3
: Window
C01672/4 0 incr L_ComparePhi_4: Window
C01672/5 0 incr L_ComparePhi_5
: Window
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
efesotomasyon.com - Lenze
To Next Page
Loading...