8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00165
622 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
C00165
C00166
C00167
C00168
53 L_MulDiv_1: Out
54 L_NSet_1: Target setpoint
Subcodes Lenze setting Info
C00164/1 0: No signal Logbook analog element 1
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00164 | Logbook - analog elements
Data type: UNSIGNED_16
Index: 24411
d
= 5F5B
h
Parameter | Name:
C00165 | Error information
Data type: VISIBLE_STRING
Index: 24410
d
= 5F5A
h
Display of the error numbers divided into sectors in the case of an error
Subcodes Info
C00165/1 Status determining error
C00165/2 Current error
; Read access Write access CINH PLC STOP ; No transfer COM MOT
Parameter | Name:
C00166 | Error information text
Data type: VISIBLE_STRING
Index: 24409
d
= 5F59
h
Display of details on the status determining and the currently pending error
Subcodes Info
C00166/1 Resp. to error state
• Response of the status determining error
C00166/2 Subj. - error state
• Subject area of the status determining error
C00166/3 Mess. - error state
• Textual message of the status determining error
C00166/4 Resp. - current error
• Response of the currently pending error
C00166/5 Subj.area curr. error
• Subject area of the currently pending error
C00166/6 Mess.curr.error
• Textual message of the currently pending error
; Read access Write access CINH PLC STOP ; No transfer COM MOT
Parameter | Name:
C00167 | Logbook data
Data type: OCTET_STRING
Index: 24408
d
= 5F58
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00168 | Status-determining error
Data type: UNSIGNED_32
Index: 24407
d
= 5F57
h
Display of the internal error number for the status-determining error
Display range (min. value | unit | max. value)
0 4294967295
; Read access Write access CINH PLC STOP ; No transfer COM MOT Scaling factor: 1
efesotomasyon.com - Lenze
To Next Page
Loading...