Lenze E84AVHC Series - C00465 | Keypad: Time-out welcome screen; C00466 | Keypad: default parameter; C00467 | Keypad: default welcome screen; C00469 | Keypad: STOP key function

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 661
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00465
C00465
C00466
C00467
C00468
C00469
Parameter | Name:
C00465 | Keypad: Time-out welcome screen
Data type: INTEGER_32
Index: 24110
d
= 5E2E
h
Time setting for the automatic change of the keypad display to the welcome screen
Selection list (Lenze setting printed in bold)
0 Never display welcome screen
55 min
15 15 min
30 30 min
60 60 min
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00466 | Keypad: default parameter
Data type: INTEGER_32
Index: 24109
d
= 5E2D
h
Setting of the default parameters for the keypad
Setting range (min. value | unit | max. value) Lenze setting
0 65535 51
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00467 | Keypad: default welcome screen
Data type: INTEGER_32
Index: 24108
d
= 5E2C
h
Selection of the welcome screen for the keypad
Selection list (Lenze setting printed in bold)
0 Main menu
1 Parameter list
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00468 | Service code
Data type: INTEGER_32
Index: 24107
d
= 5E2B
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00469 | Keypad: STOP key function
Data type: INTEGER_32
Index: 24106
d
= 5E2A
h
Selection of the function for the STOP key on the keypad
Selection list (Lenze setting printed in bold) Info
0 No function STOP key has no function
1 Inhibit controller STOP key sets controller inhibit in the drive
2 Activate quick stop STOP key sets quick stop in the drive
; Read access ; Write access ; CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
efesotomasyon.com - Lenze