8400 HighLine | Parameter setting & configuration
Function library
Function blocks | L_FixSet_w_2
962 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
14.1.67 L_FixSet_w_2
This FB outputs one of 16 parameterisable data words. Binary coded selection of the "fixed
value" to be output via the four selection inputs.
Inputs
Outputs
Parameter
Identifier
Data type
Information/possible settings
bSelect1 ... bSelect8
BOOL
Binary coded selection of the fixed value to be output
• See truth table displayed in the FB above.
Identifier
Data type
Value/meaning
wOut
WORD
Output of the selected fixed value
wSelect
WORD
Current selection (0 ... 15)
Parameter Possible settings Info
C00662/1...16
0 65535 Fixed values 0 ... 15
• Lenze setting: 0
/B)L[6HWBZB
Z2XWE6HOHFW
Z6HOHFWE6HOHFW
E6HOHFW
E6HOHFW
E6HOHFW E6HOHFW E6HOHFW E6HOHFW Z2XW
&
&
)$/6()$/6()$/6()$/6(
758()$/6()$/6()$/6(
&)$/6(758()$/6()$/6(
&758(758()$/6()$/6(
&)$/6()$/6(758()$/6(
&)$/6(758(758()$/6(
&758()$/6(758()$/6(
&758(758(758()$/6(
&
&
)$/6()$/6()$/6(758(
758()$/6()$/6(758(
&)$/6(758()$/6(758(
&758(758()$/6(758(
&)$/6()$/6(758(758(
&)$/6(758(758(758(
&758()$/6(758(758(
&758(758(758(758(
efesotomasyon.com - Lenze