Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 471
8400 HighLine | Parameter setting & configuration
Diagnostics & error management
Error messages of the operating system
9.9 Error messages of the operating system
This chapter describes all error messages of the controller operating system and possible
causes & remedies.
Tip!
Each error message is also saved in the logbook in chronological order. Logbook
( 460)
9.9.1 Structure of the error number (bit coding)
If an error occurs in the controller, the internal fault memory saves a 32-bit value which
contains the following information:
[9-3] Structure of the error number
For the sake of legibility, the error number in the logbook and in C00165 is displayed with
the following syntax: [Error type].[Error subject area no.].[Error ID]
9.9.1.1 Error type
The error type gives information about the behaviour/response of the controller to the
error. The error type for some device errors can also be parameterised.
Reserved
Error type
Error subject area
Error ID
210 3
Bit
162526
31
015
29
30
Bit 29 Bit 28 Bit 27 Bit 26 Meaning
0 0 0 0 0: No response
00011: Fault
00102: Trouble
00113: TroubleQSP
01004: WarningLocked
01015: Warning
01106: Information
Bit
162526
31
015
29
30
efesotomasyon.com - Lenze
To Next Page
Loading...