Lenze E84AVHC Series - 9.2 LED status displays

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 453
8400 HighLine | Parameter setting & configuration
Diagnostics & error management
LED status displays
9.2 LED status displays
Information on some operating statuses can quickly be obtained via LED displays:
[9-1] LED display on the controller front panel
Related topics:
Device control (DCTRL)
( 65)
Device states
( 76)
System bus "CAN on board"
( 500)
DRIVE READY
CAN-RUN
DRIVE ERROR
CAN-ERROR
Labelling Colour Description
CAN-RUN green CAN bus ok LED status displays for
the system bus ( 507)
CAN-ERR red CAN bus error
DRIVE READY green Standard device ready for operation L ED st at us dis plays of the
device state ( 454)
DRIVE ERROR red Warning/Fault/Error
efesotomasyon.com - Lenze