Lenze E84AVHC Series - 14.2.22 LS_ParReadWrite_1-6

8400 HighLine | Parameter setting & configuration
Function library
System blocks | LS_ParReadWrite_1-6
1086 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
14.2.22 LS_ParReadWrite_1-6
The LS_ParReadWrite_1 ... LS_ParReadWrite_6 system blocks are used for reading and
writing local parameters.
 If several system blocks are activated at the same time, the blocks will be processed one
at a time every time the main program is executed.
 The SB supports one-time and cyclic reading/writing in an adjustable time interval.
Inputs
Identifier
Data type
Information/possible settings
bExecute
BOOL
Trip read/write request
FALSEÊTRUE If cycle time (C01091) = "0 ms":
One-time
reading/writing of the parameter value which has been
addressed via thewParIndex and wParSubindex inputs.
If cycle time (C01091) > "0 ms":
Cyclic
reading/writing of the parameter value which has been
addressed via the wParIndex and wParSubindex inputs.
TRUEÌFALSE Deactivate cyclic reading/writing again.
bReadWrite
BOOL
Selection: Read or write request
FALSE Read request
TRUE Write request
wParIndex
WORD
Code to be read or written.
wParSubindex
WORD
Subcode to be read or written.
wInHWord
wInLWord
WORD
Value to be written (DataHigh/DataLow portion)
E([HFXWH E'RQH
E5HDG:ULWH
E)DLO
Z2XW+:RUG
Z3DU,QGH[
Z3DU6XELQGH[
Z,Q+:RUG
Z,Q/:RUG Z2XW/:RUG
&
:ULWH 5HDG
/6B3DU5HDG:ULWHB[
&[
&\FOHWLPH
&[
6WDWH
efesotomasyon.com - Lenze