Lenze E84AVHC Series - C00877 | MCI output words; C00890 | MCI_InOut: Inversion

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 749
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00877
C00877
C00890
Parameter | Name:
C00877 | MCI output words
Data type: UNSIGNED_16
Index: 23698
d
= 5C92
h
Display of the 16-bit output values to the communication module
Display area (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded:
Bit 0 Active
... ...
Bit 15 Active
Subcodes Info
C00877/1 LP_MciOut
: wState
C00877/2 LP_MciOut
:wOut2
C00877/3 LP_MciOut
:wOut3
C00877/4 LP_MciOut
: wOut4
C00877/5 LP_MciOut
: wOut5
C00877/6 LP_MciOut
: wOut6
C00877/7 LP_MciOut
: wOut7
C00877/8 LP_MciOut
: wOut8
C00877/9 LP_MciOut
: wOut9
C00877/10 LP_MciOut
: wOut10
C00877/11 LP_MciOut
: wOut11
C00877/12 LP_MciOut
: wOut12
C00877/13 LP_MciOut
: wOut13
C00877/14 LP_MciOut
: wOut14
C00877/15 LP_MciOut
: wOut15
C00877/16 LP_MciOut
: wOut16
; Read access  Write access  CINH  PLC STOP ; No transfer  COM  MOT
Parameter | Name:
C00890 | MCI_InOut: Inversion
Data type: UNSIGNED_16
Index: 23685
d
= 5C85
h
As of version 02.00.00
Via these parameters, the control and status bits of the MCI port blocks can be inverted
Setting range (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded: Info
Bit 0 Active Bit set = inversion active
... ...
Bit 15 Active
Subcodes Lenze setting Info
C00890/1 0 Inversion of LP_MciIn.wCtrl
C00890/2 0 Inversion of LP_MciOut.wState
C00890/3 0 Inversion of LP_MciIn.bIn2_B0...15
C00890/4 0 Inversion of LP_MciOut.bOut2_B0...15
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT
efesotomasyon.com - Lenze