8400 HighLine | Parameter setting & configuration
Diagnostics & error management
Operation without mains supply
470 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
9.8 Operation without mains supply
The following display parameters have a value of "0" if the mains supply is switched off and
the external 24 V supply of the controller is switched on:
Parameter Info
C00050 MCTRL: Speed setpoint
C00051 MCTRL: Actual speed value
C00052 Motor voltage
C00053 DC-bus voltage
C00054 Motor current
C00058 Output frequency
C00061 Heatsink temperature
C00064/1...3 Device utilisation (Ixt)
C00066 Thermal motor load (I²xt)
C00177 Switching cycles
C00725 Current switching frequency
efesotomasyon.com - Lenze
To Next Page
Loading...