8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00158
616 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
C00158
Parameter | Name:
C00158 | Cause of controller inhibit
Data type: UNSIGNED_16
Index: 24417
d
= 5F61
h
Bit-coded display of the cause/source of controller inhibit
Display area (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded:
Bit 0 Terminal controller enable
Bit 1 CAN control word
Bit 2 MCI control word
Bit 3 SwitchOn
Bit 4 Application
Bit 5 Controller command
Bit 6 Error response
Bit 7 Internal signal
Bit 8 Reserved
Bit 9 Reserved
Bit 10 AutoStartLock
Bit 11 Motor parameter identification
Bit 12 Automatic brake operation
Bit 13 DCB-IMP
Bit 14 Reserved
Bit 15 Reserved
; Read access Write access CINH PLC STOP ; No transfer COM MOT
efesotomasyon.com - Lenze
To Next Page
Loading...