Lenze E84AVHC Series - 14.2.14 LS_MotionControlKernel; 14.2.15 LS_MotorInterface

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 1079
8400 HighLine | Parameter setting & configuration
Function library
System blocks | LS_MotionControlKernel
Parameter
14.2.14 LS_MotionControlKernel
Interface to the basic drive functions implemented in Motion Control Kernel (MCK).
14.2.15 LS_MotorInterface
Interface to internal motor control.
Parameter Possible settings Info
C00727/1...8
0 1 Keypad digital values
• Executing control commands
when operating via keypad
• See the "Outputs" table for the
meaning of the individual
subcodes
C00728/1...3
-199.99 % 199.99 Keypad analog values
• Selection of different setpoints
when operating via keypad
• See the "Outputs" table for the
meaning of the individual
subcodes
 For a detailed description see the main chapter "Basic drive functions":
Internal interfaces | System block "LS_MotionControlKernel"
( 364)
 For a detailed description see the main chapter "Motor control (MCTRL)":
Internal interfaces | system block "LS_MotorInterface"
( 208)
efesotomasyon.com - Lenze