Lenze E84AVHC Series - C00621 | System connection list: Bool

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 679
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00621
C00621
C00620/50 0: Not connected LS_ParReadWrite_1
: wParSubindex
C00620/51 0: Not connected LS_ParReadWrite_1
: wInHWord
C00620/52 0: Not connected LS_ParReadWrite_1
: wInLWord
C00620/53 0: Not connected LS_ParReadWrite_2
: wParIndex
C00620/54 0: Not connected LS_ParReadWrite_2
: wParSubindex
C00620/55 0: Not connected LS_ParReadWrite_2
: wInHWord
C00620/56 0: Not connected LS_ParReadWrite_2
: wInLWord
C00620/57 0: Not connected LS_ParReadWrite_3
: wParIndex
C00620/58 0: Not connected LS_ParReadWrite_3
: wParSubindex
C00620/59 0: Not connected LS_ParReadWrite_3
: wInHWord
C00620/60 0: Not connected LS_ParReadWrite_3
: wInLWord
C00620/61 0: Not connected LS_ParReadWrite_4
: wParIndex
C00620/62 0: Not connected LS_ParReadWrite_4
: wParSubindex
C00620/63 0: Not connected LS_ParReadWrite_4
: wInHWord
C00620/64 0: Not connected LS_ParReadWrite_4
: wInLWord
C00620/65 0: Not connected LS_ParReadWrite_5
: wParIndex
C00620/66 0: Not connected LS_ParReadWrite_5
: wParSubindex
C00620/67 0: Not connected LS_ParReadWrite_5
: wInHWord
C00620/68 0: Not connected LS_ParReadWrite_5
: wInLWord
C00620/69 0: Not connected LS_ParReadWrite_6
: wParIndex
C00620/70 0: Not connected LS_ParReadWrite_6
: wParSubindex
C00620/71 0: Not connected LS_ParReadWrite_6
: wInHWord
C00620/72 0: Not connected LS_ParReadWrite_6
: wInLWord
C00620/73 0: Not connected Reserved
C00620/74 0: Not connected Reserved
C00620/75 0: Not connected Reserved
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00620 | System connection list: 16-bit
Data type: UNSIGNED_16
Index: 23955
d
= 5D93
h
Parameter | Name:
C00621 | System connection list: Bool
Data type: UNSIGNED_16
Index: 23954
d
= 5D92
h
Connection parameters: Binary inputs
• Selection of the binary output signals for connection with the binary input signals.
• The selection list contains all binary output signals which can be assigned to the binary inputs mapped by the
subcodes.
Selection list
See selection list - digital signals
Subcodes Lenze setting Info
C00621/1 1001: LA_nCtrl_bDriveFail LS_DigitalOutput
:bRelay
C00621/2 1000: LA_nCtrl_bDriveReady LS_DigitalOutput
:bOut1
C00621/3 0: Not connected LS_DigitalInput
: bCountIn1_Reset
C00621/4 0: Not connected LS_DigitalInput
: bCountIn1_LoadStartValue
C00621/5 0: Not connected LP_CanOut1
: bState_B0
C00621/6 0: Not connected LP_CanOut1
: bState_B1
C00621/7 0: Not connected LP_CanOut1
: bState_B2
C00621/8 0: Not connected LP_CanOut1
: bState_B3
efesotomasyon.com - Lenze