Lenze E84AVHC Series User Manual

8400 HighLine | Parameter setting & configuration
Motor control (MCTRL)
Servo control (SC)
150 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
 Slip compensation ( 179)
– Using a slip model, the slip of the machine is reconstructed.
– The slip compensation (C00021
) acts as the influencing parameter.
5.7.1.2 Torque control with speed limitation
For torque-controlled operation, a torque setpoint is defined in the drive system.
 The torque setpoint is calculated directly from nTorqueSetValue_a.
 The speed is defined by the process.
 Due to its limitation, the speed-controlled drive can only rotate within a speed range
whose positive speed is limited by the value of nSpeedHighLimit_a and whose negative
speed is limited by the value of nSpeedLowLimit_a.
Identifier
DIS code | data type
Information/possible settings
nTorqueSetValue_a
C00830/27 | INT
Torque setpoint / additive torque
• Scaling: 16384 ≡ 100 % M
max
(C00057)
nSpeedHighLimit_a
C00830/88 | INT
Upper speed limit for speed limitation
(only for torque-controlled operation)
• Scaling: 16384 ≡ 100 % rated speed (C00011
)
nSpeedLowLimit_a
C00830/23 | INT
Lower speed limit for speed limitation
(only for torque-controlled operation)
• Scaling: 16384 ≡ 100 % rated speed (C00011
)
efesotomasyon.com - Lenze

Lenze E84AVHC Series Specifications

General

Brand	Lenze
Model	E84AVHC Series
Category	Inverter Drive
Language	English