8400 HighLine | Parameter setting & configuration
About this documentation
Conventions used
22 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
1.2 Conventions used
This Software Manual uses the following conventions to distinguish between different
types of information:
All information that only applies to a certain controller software version or higher is
identified accordingly in this documentation.
Type of information Writing Examples/notes
Spelling of numbers
Decimal separators Point The decimal point is generally used.
For example: 1234.56
Text
Version info Blue text colour All information that only applies to a certain
controller software version or higher is identified
accordingly in this documentation.
Example: This function extension is available from
software version 04.00.00!
Program name » « The Lenze »Engineer« PC software ...
Window Italics The Message window... / The Options dialog box...
Variable identifier By setting bEnable to TRUE...
Control element Bold The OK button... / The Copy command... / The
Properties tab... / The Name input field...
Sequence of menu
commands
If the execution of a function requires several
commands, the individual commands are separated
by an arrow: Select File
Open to...
Shortcut <Bold> Press <F1> to open the online help.
If a command requires a combination of keys, a "+" is
placed between the key symbols:
Use <Shift>+<ESC> to...
Hyperlink underlined
Optically highlighted reference to another topic. In
this documentation activated by mouse-click.
Icons
Page reference ( 22) Optically highlighted reference to another page. In
this documentation activated by mouse-click.
Step-by-step instructions
Step-by-step instructions are indicated by a
pictograph.
efesotomasyon.com - Lenze
To Next Page
Loading...