Lenze E84AVHC Series - C00179 | Power-on time meter; C00180 | Running time; C00182 | S-ramp time PT1; C00184 | AutoFailReset repetition time

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 625
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00179
C00179
C00180
C00182
C00184
C00185
Parameter | Name:
C00179 | Power-on time meter
Data type: UNSIGNED_32
Index: 24396
d
= 5F4C
h
Display of the power-on time in "seconds" unit
Display range (min. value | unit | max. value)
0 s 2147483647
; Read access  Write access  CINH  PLC STOP ; No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00180 | Running time
Data type: UNSIGNED_32
Index: 24395
d
= 5F4B
h
Display of different running times in "seconds" unit
Display range (min. value | unit | max. value)
0 s 2147483647
Subcodes Info
C00180/1 Running time - control card
C00180/2 Running time - heatsink fan
C00180/3 Running time - internal fan
; Read access  Write access  CINH  PLC STOP ; No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00182 | S-ramp time PT1
Data type: INTEGER_16
Index: 24393
d
= 5F49
h
PT1 S-ramp time for the main setpoint ramp function generator
• Only effective with activated ramp rounding (C00134
="1").
Setting range (min. value | unit | max. value) Lenze setting
0.01 s 50.00 20.00 s
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00184 | AutoFailReset repetition time
Data type: UNSIGNED_16
Index: 24391
d
= 5F47
h
After the time set here, the error message of an occurred error will be reset automatically when the "AutoFailReset"
is configured accordingly in C00188
.
AutoFailReset function
Setting range (min. value | unit | max. value) Lenze setting
1 s 600 3s
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00185 | AutoFailReset residual runtime
Data type: UNSIGNED_16
Index: 24390
d
= 5F46
h
Display of the residual runtime of the "AutoFailReset" function
AutoFailReset function
Display range (min. value | unit | max. value)
0 s 600
; Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
efesotomasyon.com - Lenze