Lenze E84AVHC Series - 14.1.129 L_SignalSwitch_1

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 1051
8400 HighLine | Parameter setting & configuration
Function library
Function blocks | L_SignalSwitch_1
14.1.129 L_SignalSwitch_1
This FB switches between two input signals of the "WORD" data type. The switch-over is
controlled by means of a boolean input signal.
Inputs
Outputs
Identifier
Data type
Information/possible settings
wIn1
WORD
Input signal 1
wIn2
WORD
Input signal 2
bSet
BOOL
Selection of the input signal for the output at wOut
FALSE wIn1
TRUE wIn2
Identifier
Data type
Value/meaning
wOut
WORD
Output signal
/B6LJQDO6ZLWFKB
Z,Q
Z2XW
Z,Q
E6HW


efesotomasyon.com - Lenze