Lenze E84AVHC Series User Manual

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 871
8400 HighLine | Parameter setting & configuration
Working with the FB Editor
Exporting/Importing an interconnection
13.9 Exporting/Importing an interconnection
The interconnection existing in the project can be exported to a file for reuse/transfer to
other devices.
 How to export the interconnection from the project to a file:
1. Go to the Project view in the context menu of the controller and select the Export
FB interconnection... command.
2. Enter the memory location and the file name for the interconnection to be
exported in the Export FB interconnection dialog box.
3. Click Save to export the interconnection and close the dialog box.
 How to import the interconnection from a file to the project:
1. Go to the Project view in the context menu of the controller and select the Import
FB interconnection... command.
2. Select the file with the interconnection to be imported in the Import FB
interconnection dialog box.
3. Click Open to import the interconnection and close the dialog box.
 Note!
The file can only be imported to devices of the same device type and version (e.g.
8400 HighLine C V1.0).
efesotomasyon.com - Lenze

Lenze E84AVHC Series Specifications

General

Product Category	Inverter Drive
Series	E84AVHC
Frequency	50/60 Hz
Protection Class	IP20
Output Voltage	0 - Input Voltage
Control Method	V/f control
Communication	CANopen, Ethernet
Protection	Overcurrent, overvoltage, undervoltage, short circuit
Relative Humidity	< 95 %, no condensation
Cooling Method	Fan cooling