8400 HighLine | Parameter setting & configuration
Technology applications
"GeneralPurpose" functions
360 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
7.7.10 Counter
This function is a digital upcounter and downcounter with a comparison operation.
[7-10] GeneralPurpose function "Counter"
Only available with TA "Table positioning".
For a detailed functional description see FB L_Counter
.
bGPCounter1Equal
bGPCounter1ClkDown
wGPCounter1LdVal
bGPCounter1Load
wGPCounter1CmpVal
bGPCounter1ClkUp
wGPCounter1Out
C01100
1
3
4
2
Function
C01101
Parameter Info Lenze setting
Value Unit
C01100/1 L_Counter_1: Function 0: Normal counting
C01101/1
L_Counter_1: Comparison 0: Greater than or equal to
efesotomasyon.com - Lenze