Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 745
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00844
C00844
C00843/124 LS_WriteParamList
: bSelectWriteValue_1
C00843/125 LS_WriteParamList
: bSelectWriteValue_2
C00843/126 LS_CANManagement
: bResetNode
C00843/127 LS_CANManagement
: bReInitCAN
; Read access Write access CINH PLC STOP ; No transfer COM MOT Scaling factor: 1
Parameter | Name:
C00843 | 8bit SysInput
Data type: UNSIGNED_8
Index: 23732
d
= 5CB4
h
Parameter | Name:
C00844 | 32bit SysInput
Data type: INTEGER_32
Index: 23731
d
= 5CB3
h
Display of 32-bit input values of different I/O level blocks in [increments]
Display range (min. value | unit | max. value)
-2147483647 incr 2147483647
Subcodes Info
C00844/1 LS_DisFree_p
:dnDis1_p
C00844/2 LS_DisFree_p
:dnDis2_p
C00844/3 LS_DisFree_p
: dnDis3_p
C00844/4 LS_DisFree_p
: dnDis4_p
C00844/5 LS_DisFree_p
: dnDis5_p
C00844/6 LS_DisFree_p
: dnDis6_p
C00844/7 LS_DisFree_p
: dnDis7_p
C00844/8 LS_DisFree_p
: dnDis8_p
C00844/9 LP_CanOut1
: dnOut34_p
C00844/10 LP_CanOut2
: dnOut34_p
C00844/11 LP_CanOut3
: dnOut34_p
C00844/12 LP_MciOut
: dnOut34_p
; Read access Write access CINH PLC STOP ; No transfer COM MOT Scaling factor: 1
efesotomasyon.com - Lenze
To Next Page
Loading...