Lenze E84AVHC Series - C00800 | L_MPot_1: Upper limit; C00801 | L_MPot_1: Lower limit; C00802 | L_MPot_1: Acceleration time

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 705
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00762
C00762
C00765
C00766
C00767
C00800
C00801
C00802
C00761/44 0: Not connected LA_SwitchPos
: bFreeIn5
C00761/45 0: Not connected LA_SwitchPos
: bFreeIn6
C00761/46 0: Not connected LA_SwitchPos
: bFreeIn7
C00761/47 0: Not connected LA_SwitchPos
: bFreeIn8
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00761 | LA_SwitchPos: Digital connection list
Data type: UNSIGNED_16
Index: 23814
d
= 5D06
h
Parameter | Name:
C00762 | LA_SwitchPos: phi connection list
Data type: UNSIGNED_16
Index: 23813
d
= 5D05
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00765 | LA_SwitchPos_Out: Analog signal list
Data type: UNSIGNED_16
Index: 23810
d
= 5D02
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00766 | LA_SwitchPos_Out: Digital signal list
Data type: UNSIGNED_16
Index: 23809
d
= 5D01
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00767 | LA_SwitchPos_Out: phi signal list
Data type: UNSIGNED_16
Index: 23808
d
= 5D00
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00800 | L_MPot_1: Upper limit
Data type: INTEGER_16
Index: 23775
d
= 5CDF
h
FB L_MPot_1: Upper limit of the motor potentiometer function
Setting range (min. value | unit | max. value) Lenze setting
-199.99 % 199.99 100.00 %
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00801 | L_MPot_1: Lower limit
Data type: INTEGER_16
Index: 23774
d
= 5CDE
h
FB L_MPot_1: Lower limit of the motor potentiometer function
Setting range (min. value | unit | max. value) Lenze setting
-199.99 % 199.99 -100.00 %
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00802 | L_MPot_1: Acceleration time
Data type: UNSIGNED_16
Index: 23773
d
= 5CDD
h
FB L_MPot_1: Acceleration time of the motor potentiometer function
Setting range (min. value | unit | max. value) Lenze setting
0.1 s 6000.0 10.0 s
; Read access ; Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10
efesotomasyon.com - Lenze