Lenze E84AVHC Series - C00830 | 16 bit input analog

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 713
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00830
C00830
Parameter | Name:
C00830 | 16bit input analog
Data type: INTEGER_16
Index: 23745
d
= 5CC1
h
Display in percent of 16-bit input values of different blocks
Display range (min. value | unit | max. value)
-199.99 % 199.99
Subcodes Info
C00830/1 L_Absolut_1
: nIn_a
C00830/2 L_AddSub_1
: nIn1_a
C00830/3 L_AddSub_1
: nIn2_a
C00830/4 L_AddSub_1
: nIn3_a
C00830/5 L_OffsetGain_1
: nIn_a
C00830/6 L_OffsetGain_1
: nOffset_a
C00830/7 L_OffsetGain_1
: nGain_a
C00830/8 L_Negation_1
: nIn_a
C00830/9 L_GainOffset_1
: nIn_a
C00830/10 L_GainOffset_1
: nGain_a
C00830/11 L_GainOffset_1
: nOffset_a
C00830/12 L_Arithmetik_1
: nIn1_a
C00830/13 L_Arithmetik_1
: nIn2_a
C00830/14 L_AnalogSwitch_1
: nIn1_a
C00830/15 L_AnalogSwitch_1
: nIn2_a
C00830/16 L_Compare_1
: nIn1_a
C00830/17 L_Compare_1
: nIn2_a
C00830/18 MCTRL
: nTorqueLimitAdapt_a
C00830/19 Reserved
C00830/20 MCTRL
: nPosCtrlPAdapt_a
C00830/21 MCTRL
: nPosCtrlOutLimit_a
C00830/22 MCTRL
: nSpeedSetValue_a
C00830/23 MCTRL: nSpeedLowLimit_a
C00830/24 MCTRL
: nSpeedCtrlI_a
C00830/25 MCTRL: nSpeedCtrlPAdapt_a
C00830/26 MCTRL
: nBoost_a
C00830/27 MCTRL
: nTorqueSetValue_a
C00830/28 MCTRL: nTorqueGenLimit_a
C00830/29 MCTRL
: nTorqueMotLimit_a
C00830/30 Reserved
C00830/31 MCTRL
: nVoltageAdd_a
C00830/32 MCTRL
: nPWMAngleOffset_a
C00830/33 L_NSet_1
: nCInhVal_a
C00830/34 L_NSet_1
: nNSet_a
C00830/35 L_NSet_1
: nSet_a
C00830/36 L_NSet_1
: nNAdd_a
C00830/37 DCTRL
: wCANControl
C00830/38 DCTRL
: wCCMControl
C00830/39 L_NLim_1
: nIn_a
C00830/40 Reserved
efesotomasyon.com - Lenze