8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00830
714 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
C00830/41 L_Compare_2: nIn1_a
C00830/42 L_Compare_2
: nIn2_a
C00830/43 L_Compare_3
: nIn1_a
C00830/44 L_Compare_3
: nIn2_a
C00830/45 L_AnalogSwitch_2
: nIn1_a
C00830/46 L_AnalogSwitch_2
: nIn2_a
C00830/47 L_AnalogSwitch_3
: nIn1_a
C00830/48 L_AnalogSwitch_3
: nIn2_a
C00830/49 L_Arithmetik_2
: nIn1_a
C00830/50 L_Arithmetik_2
: nIn2_a
C00830/51 Reserved
C00830/52 Reserved
C00830/53 L_GainOffset_2
: nIn_a
C00830/54 L_GainOffset_2
: nGain_a
C00830/55 L_GainOffset_2
: nOffset_a
C00830/56 L_OffsetGainP_1
: nIn_a
C00830/57 L_OffsetGainP_2
: nIn_a
C00830/58 L_OffsetGain_2
: nIn_a
C00830/59 L_OffsetGain_2
: nOffset_a
C00830/60 L_OffsetGain_2
: nGain_a
C00830/61 L_PCTRL_1
: nAct_a
C00830/62 L_PCTRL_1
: nAdapt_a
C00830/63 L_PCTRL_1
: nSet_a
C00830/64 L_PCTRL_1
: nInfluence_a
C00830/65 MCK: nSpeedCtrlI_a
C00830/66 MCK: nPWMAngleOffset_a
C00830/67 Reserved
C00830/68 MCK: nBrkTorqueAdd_a
C00830/69 MCK: nTorqueSetValue_a
C00830/70 MCK: nTorqueLimitAdapt_a
C00830/71 MCK: nSRampOverride_a
C00830/72 MCK: nSpeedSetValue_a
C00830/73 MCK: wMotionCtrl2
C00830/74 MCK: wMotionCtrl1
C00830/75 MCK: nSpeedOverride_a
C00830/76 MCK: nAccOverride_a
C00830/77 MCK: nSpeedAdd_v
C00830/78 MCK: wAuxCtrl
C00830/79 MCK: wSMCtrl
C00830/80 L_OffsetGainP_3
: nIn_a
C00830/81 L_MPot_1
: nIn_a
C00830/82 L_MulDiv_1
: nIn_a
C00830/83 LS_DataAccess: wIn1
(Lenze-internal)
Parameter | Name:
C00830 | 16bit input analog
Data type: INTEGER_16
Index: 23745
d
= 5CC1
h
efesotomasyon.com - Lenze
To Next Page
Loading...