Lenze E84AVHC Series - 6.1.1.1 Using DI1(6) and DI2(7) as digital inputs

8400 HighLine | Parameter setting & configuration
I/O terminals
Digital input terminals
220 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
6.1.1.1 Using DI1(6) and DI2(7) as digital inputs
Function assignment 0: DI1(6)=In / DI2(7)=In
With this setting in C00115
, the digital input terminals have been configured as "normal"
digital inputs.
 For each digital input, the debounce time (C02830/1...7
) and the terminal polarity
(C00114
) can be set individually.
 The current terminal level at the input of the internal processing function is shown in
C00443/1
in bit-coded form.
 The output level for the application is shown in C00443/2
in bit-coded form.
Internal interfaces to the application
 Relevant outputs at LS_DigitalInput
system block:
Related topics:
Using DI1(6) and DI2(7) as frequency inputs
( 221)
Using DI1(6) as counting input
( 225)
Internal interfaces | System block "LS_DigitalInput"
( 229)
Output
DIS code | data type
Value/meaning
bIn1 ... bIn7
C00443/2 | BOOL
Digital input DI1 ... DI7
&%LW
E,Q
E,Q
E,Q
E,Q
E,Q
E,Q
E,Q



&
W
&[
&%LW
&%LW
&%LW
&%LW
&%LW
&%LW
&%LW
&%LW
&%LW
&%LW
',
',
',
',
',
',
',
&%LW
&%LW
&%LW














efesotomasyon.com - Lenze