8400 HighLine | Parameter setting & configuration
Technology applications
General information
256 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
7 Technology applications
A technology application is a drive solution equipped with Lenze's experience and know-
how in which function and system blocks interconnected to a signal flow clearly show the
basis for implementing typical drive tasks.
This chapter describes the handling and the functional range of the technology
applications available for the 8400 HighLine drive controller.
7.1 General information
7.1.1 Purpose of the technology applications
The stepped Inverter Drives 8400 series provides solutions for simple to complex
applications – depending on the user's experience and knowledge about the handling of
drives and drive tasks.
Some drive tasks are similar in practice so that a few modifications of the corresponding
technology applications can provide the required result very quickly.
On the one hand a great scope of standard drive tasks for frequency inverters is covered by
the technology applications offered by Lenze, and on the other hand, the user is relieved
from time-consuming programming activities.
Other important features of technology applications are:
Direct implementation of drive tasks without recreating a function block
interconnection inside the device
Operation via keypad and/or operation via convenient operator dialogs in the
«Engineer»
Commissioning via few operating and diagnosing parameters (local keypad operation)
Achieving a transparency as high as possible via the integrated functionality of the
device by representing signal flow diagrams
Provision of a basic functionality suitable and often sufficient for many applications
Note!
Please note that the StateLine and HighLine device types differ with regard to
the number, functional range, and flexibility of the technology applications
offered.
efesotomasyon.com - Lenze
To Next Page
Loading...
Need help?
General
